INTERNATIONAL (EN)
EUROPEAN UNION (DE)
POLAND (PL)
UKRAINE (RU)
TECHNICAL DATA
| BN_L01 PUMP TYPE | 6 (bar) | 0,1 - 300 (m3/h) | DATA | DRAWING | OPEN |
|---|---|---|---|---|---|
| BN_S01 PUMP TYPE | 6 (bar) | 0,5 - 200 (m3/h) | DATA | DRAWING | OPEN |
|---|---|---|---|---|---|
| BN_S02 PUMP TYPE | 12 (bar) | 0,1 - 180 (m3/h) | DATA | DRAWING | OPEN |
|---|---|---|---|---|---|
| BN_S03 PUMP TYPE | 18 (bar) | 3 - 80 (m3/h) | DATA | DRAWING | OPEN |
|---|---|---|---|---|---|
| BN_S04 PUMP TYPE | 24 (bar) | 0,1 - 140 (m3/h) | DATA | DRAWING | OPEN |
|---|---|---|---|---|---|
| BN_S06 PUMP TYPE | 36 (bar) | 2 - 140 (m3/h) | DATA | DRAWING | OPEN |
|---|---|---|---|---|---|
| BN_S08 PUMP TYPE | 48 (bar) | 0,1 - 140 (m3/h) | DATA | DRAWING | OPEN |
|---|---|---|---|---|---|
DESIGN
1
Discharge Flange2
Thru-Bolt3
Stator4
Pump Housing5
Suction Flange6
Rotor7
Holding Band8
Boot Seal9
Guide Bush10
Coupling Rod Pin11
Coupling Rod Bush12
Coupling Rod13
Retaining Sleeve14
Plug-in Shaft15
Shaft Pin16
Shaft Sealing17
Sealing Plate18
Retaining Ring19
Lantern20
Gear21
Drive22
Support23
Pump BaseDESIGNATION
| BN | 031 | S02 | H | YY | X | |||||||||||||||||||
| SERIES | ||||||||||||||||||||||||
| BN - horizontal pumps | ||||||||||||||||||||||||
| BV - semi-submersible pumps | ||||||||||||||||||||||||
| BM - dosing metering pumps | ||||||||||||||||||||||||
| BT - barrel drum pumps | ||||||||||||||||||||||||
| MODEL | ||||||||||||||||||||||||
| This parameter defines the diameter and the pitch of the rotor | ||||||||||||||||||||||||
| and determines potential flow rate of the pump | ||||||||||||||||||||||||
| TYPE | ||||||||||||||||||||||||
| L01 - pressure up to 6 (bar) | ||||||||||||||||||||||||
| S01 - pressure up to 6 (bar) | ||||||||||||||||||||||||
| S02 - pressure up to 12 (bar) | ||||||||||||||||||||||||
| S03 - pressure up to 18 (bar) | ||||||||||||||||||||||||
| S04 - pressure up to 24 (bar) | ||||||||||||||||||||||||
| S06 - pressure up to 36 (bar) | ||||||||||||||||||||||||
| S08 - pressure up to 48 (bar) | ||||||||||||||||||||||||
| MATERIAL | ||||||||||||||||||||||||
| H - carbon steel | ||||||||||||||||||||||||
| F - stainless steel AISI 321 | ||||||||||||||||||||||||
| C - stainless steel AISI 316 | ||||||||||||||||||||||||
| DRIVE SHAFT SEALING | ||||||||||||||||||||||||
| Z - stuffing box | ||||||||||||||||||||||||
| Y - single mechanical seal | ||||||||||||||||||||||||
| YY - double mechanical seal | ||||||||||||||||||||||||
| OPTIONS & ACCESSORIES | ||||||||||||||||||||||||
| B - open hopper | ||||||||||||||||||||||||
| S - feeding screw | ||||||||||||||||||||||||
| C - clean-in-place | ||||||||||||||||||||||||
| X - explosion protection | ||||||||||||||||||||||||
| M - mobile platform | ||||||||||||||||||||||||
| V - speed variator | ||||||||||||||||||||||||
| N - frequency inverter | ||||||||||||||||||||||||
OPERATION
SOLTEC Progressive Cavity Pumps is a type of positive displacement pumps that employs an assembly of a single-helical steel rotor and a double-helical resilient stator. Eccentric rotation of the rotor inside the stator forms fixed-size sealed cavities that move along the assembly creating pressure.
The diameter and the eccentricity of the rotor are responsible for the capacity of the pump when the pitch of the rotor is responsible for potential pressure. Usually one pitch of the rotor can develop pressure up to 6 bar. SOLTEC manufactures rotors and stators up to 8 pitches which develop pressure up to 48 bar.
APPLICATION
FOOD & PHARMACEUTICAL INDUSTRY
OIL & GAS INDUSTRY
MINING & EXPLOSIVES INDUSTRY
WASTEWATER & BIOGAS INDUSTRY
PAINTS & COATING INDUSTRY
PULP & PAPER INDUSTRY
USA
