BATURIN | Single screw pump SOLTEC ® BN063S04HY for pumping of drilling mud

CLEAN ENERGY

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

WATER TREATMENT

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

AGRICULTURE

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

FOOD INDUSTRY

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

CONSTRUCTION

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

HEALTHCARE

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

OIL & GAS

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

MINING

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

Home > OUR PROJECTS > Single screw pump SOLTEC ® BN063S04HY for pumping of drilling mud

Gallery

TASK: Within the technological process regarding filtering of the drilling mud and feeding it to the filter in the drilling rig, the Customer requested a screw pump to replace the existing Seepex BN 17-24 single screw pump unit with following parameters: working pressure 12-24 bar, capacity from 2 to 17 m³/h.

The main condition of the customer is integration of SOLTEC ® pump unit with an already available motor-variator from the old Seepex pump.

SOLUTION: Specialists of SOLTEC ® have designed and manufactured a horizontal single-screw progressing cavity pump BN063S04HY with a capacity ranging from 2 to 20 m3/h.

The flowing part of the pump unit is made of materials resistant to drilling muds with abrasive particles. All connecting dimensions were calculated and matched to the landing dimensions of the Seepex pump.

Basic Characteristics of Screw Pumping Unit BN063S04HY:

Pump type - horizontal progressing cavity single-screw pump
The material of the flowing part is steel 20 with a protective coating
The material of the Rotor/Screw is 40X13 thermo-processed steel
The material of the Stator is abrasion resistant rubber
Maximum outlet pressure - up to 24 bar
Capacity - from 2 to 20 m3 / h
Seal type of the drive shaft - single mechanical
The pump is made on a base plate.