Home > OUR PROJECTS > Mud screw pumps SOLTEC ® BN063L01HYXV for pumping drilling mud
- POSTOY EUGENIY
- Leading project manager
- +7 920 554 06 32
- mn6@soltecpumps.com
- https://www.soltecpumps.com
- POSTOY EUGENIY
- Leading project manager
- +7 920 554 06 32
- mn6@soltecpumps.com
- https://www.soltecpumps.com
DESCRIPTION OF THE PROJECT
PROBLEM:
For one of the large oil service companies, the customer set the task of selecting pumping equipment for pumping drilling mud in the circulation system of the drilling rig.
SOLUTION:
The specialists of the SOLTEC ® company have developed and manufactured horizontal single-screw pumping units SOLTEC ® BN063L01HYXV with the ability to adjust the capacity using a variator. As part of the explosion protection requirements, the screw pumps are equipped with explosion-proof electric motors 1ExdIIBT4.
Technical details of screw pump BN063L01HYXV:
- Pump type - horizontal
- The material of the flow path is steel 20 with a protective coating
- Rotor material - steel 40X13 after hardening
- Stator material - oil and petrol resistant rubber SOLTEC ® NBR-1294
- Maximum outlet pressure - up to 6 bar
- Nominal capacity - 6 ... 32 m3/h
- Drive shaft seal type - single mechanical seal
- Installed power - 7.5 kW
- Explosion protection degree of the electric motor - 1ExdIIBT4
- Pump inlet/outlet - flange DN 100
- CVT - VARMEC RGAE 5-250
- Cylindrical reducer - VARMEC RCV 552F
CONTACTS
USA
BATURIN, INC
300 Spectrum Center Drive #400, Irvine, CA 92618
Headquarters
EUROPE
Plauen
V.E.P. Baumaschinen GmbH
Official representative
Antwerp
TRACS BV
Official representative
ASIA
MIDDLE EAST
Tirat Carmel
DWM TECHNICAL SERVICES LTD
Official representative
AFRICA