Home > OUR PROJECTS > Screw pump SOLTEC ® BN053S02FYBS for pumping grains

DESCRIPTION OF THE PROJECT

progressive cavity pumps soltec foto 2 progressive cavity pumps soltec foto 1 progressive cavity pumps soltec foto 3 progressive cavity pumps soltec foto 4 progressive cavity pumps soltec foto 5 progressive cavity pumps soltec foto 6 progressive cavity pumps soltec foto 7 progressive cavity pumps soltec foto 8

PROBLEM:
Pumping pellets, thick honey, pulp, wort, starch solution, caramel, toothpaste, oil sludge, fuel oil and media with an increased requirement for output pressure.

SOLUTION:
According to the tasks set, the BN053S02FYBS pump was selected. Due to the design features, the working pair that is installed on this pump, at optimal speed, will ensure stable and uniform pumping of even very viscous products through the pipeline. At the request of the customer, the pump is equipped with a neck for further installation on the bunker and a screw feeder for better intake of a viscous product from the bunker.

Technical details of screw pump BN053S02FYBS:
  • Pump type - horizontal
  • Wet end material – AISI 304
  • Maximum outlet pressure - 9 bar
  • Maximum productivity - 8 m3/hour
  • Rotor speed - 307 rpm
  • Drive shaft seal type - single mechanical seal
  • Motor specifications - 5.5 kW, 380 V, IP55
  • Additional Features – Hopper Opening and Screw Feeder
CONTACTS
  USA
BATURIN, INC
300 Spectrum Center Drive #400, Irvine, CA 92618
Headquarters
EUROPE
Lublin
BATURIN Poland
Official representative
Plauen
V.E.P. Baumaschinen GmbH
Official representative
Antwerp
TRACS BV
Official representative
ASIA
Nur-Sultan city
"SOLTEK NMZ", TOO
Official representative
MIDDLE EAST
Tirat Carmel
DWM TECHNICAL SERVICES LTD
Official representative
AFRICA
Cape Coast
Official representative
Chingola
Official representative
Lusaka
Official representative
Scottville
Official representative